Home Care Guide

1. Create a Comfortable Home That Lasts

At aubmarenodoro (hereinafter referred to as “I”), I believe that caring for your home furnishings is about more than keeping surfaces clean. A little attention to daily use, room conditions, and suitable cleaning methods can help preserve the appearance and functionality of furniture and decorative pieces over time.

Different materials respond differently to moisture, heat, sunlight, and cleaning products. Before caring for any item, I recommend checking its product description, care label, and manufacturer-provided instructions whenever available. The guidance below offers general home care suggestions and should be adapted to the specific material and finish of each product.

2. Everyday Furniture Care
2.1 Keep Surfaces Free From Dust

Dust can gradually accumulate on tabletops, shelves, cabinets, and other frequently used surfaces. Use a clean, soft, dry microfiber cloth to remove loose dust without unnecessarily scratching the finish.

For raised details, narrow corners, and decorative edges, a soft-bristled brush can help reach areas that a cloth may miss. Avoid using abrasive pads or rough materials, as these may leave marks on delicate surfaces.

2.2 Clean Spills Promptly

When liquid spills occur, gently blot the affected area with a clean, absorbent cloth. Avoid rubbing aggressively, which may spread the liquid or affect the surface finish.

If additional cleaning is necessary, use only a method suitable for the material. Test any permitted cleaning product on a small, inconspicuous area first, and allow the test area to dry before proceeding. Do not apply excessive water to wood, upholstered furniture, or materials that may absorb moisture.

2.3 Use Furniture as Intended

Follow the product's stated weight limits, assembly instructions, and intended-use guidance. Distribute items evenly across shelves and storage surfaces, and avoid placing excessive weight on edges or unsupported sections.

For furniture that requires assembly, periodically check accessible fasteners for looseness and tighten them according to the supplied instructions. Do not overtighten screws or alter structural components, as this may damage the product.

3. Care Tips for Different Materials
3.1 Wood and Wood-Look Surfaces

Wood furniture and wood-look finishes can vary in their sensitivity to moisture, temperature, and cleaning products. Use a soft cloth for routine dusting and wipe away spills promptly.

Place coasters beneath drinks and protective mats under hot dishes or other items that may leave marks. Avoid prolonged exposure to direct sunlight, standing water, and strong household cleaners unless the product instructions specifically permit their use.

For wood-look surfaces, do not assume that care methods suitable for solid wood will also be suitable for laminate, veneer, or printed finishes. Follow the instructions provided for the specific product.

3.2 Metal Components and Frames

Metal legs, handles, frames, and decorative details generally benefit from regular dusting with a soft cloth. If the product instructions allow damp cleaning, use a lightly moistened cloth and dry the surface afterward.

Keep metal components away from prolonged moisture and harsh chemicals that could affect protective coatings. If you notice corrosion, peeling, or unusual discoloration, stop using cleaning products on the affected area until you have identified a suitable care method.

3.3 Glass Surfaces

Glass tabletops and decorative glass components should be cleaned with a soft, non-abrasive cloth and a cleaner suitable for the specific glass surface, when permitted by the product instructions.

Avoid spraying liquid directly onto joints, edges, or nearby wooden and upholstered components. Apply the cleaner to the cloth when appropriate, and dry the surface to reduce streaks.

Before cleaning, check for chips, cracks, or loose fittings. Do not continue using a damaged glass component, particularly if it supports weight or forms part of a table or cabinet.

3.4 Fabric and Upholstered Furniture

Vacuum upholstered furniture gently using a suitable upholstery attachment, if the product instructions permit it. This can help remove dust, crumbs, and other loose particles from seating surfaces and crevices.

For spills, blot rather than scrub. Different fabrics may require water-based cleaning, solvent-based treatment, professional care, or other specific methods. Avoid applying a general-purpose cleaner without confirming that it is suitable for the fabric.

For removable covers, check the care label before washing or drying. Some fabrics may shrink, fade, or lose their shape when cleaned using an unsuitable method.

3.5 Synthetic and Plastic Materials

Plastic and synthetic surfaces can often be maintained with a soft cloth and a mild cleaning method approved for the material. Avoid abrasive powders, scouring pads, and strong solvents unless the product instructions explicitly allow them.

Prolonged exposure to intense sunlight or excessive heat may cause some synthetic materials to fade, soften, or change appearance. Where practical, position items away from heat sources and direct sunlight.

4. Protect Furniture From Everyday Environmental Changes
4.1 Manage Sunlight and Indoor Temperature

Long periods of direct sunlight may fade fabrics, alter finishes, or cause uneven color changes. Consider using curtains, blinds, or suitable placement to reduce continuous exposure.

Keep furniture away from radiators, fireplaces, heaters, and other concentrated heat sources unless the product is specifically designed for that location. Sudden temperature changes can also affect certain materials.

4.2 Maintain Appropriate Ventilation

Excessive indoor humidity may contribute to moisture damage, odors, or mold growth on susceptible materials. Regular ventilation and reasonable humidity control can help maintain a more suitable indoor environment.

Avoid leaving damp textiles or wet objects on furniture for extended periods. If moisture enters a cabinet, drawer, or upholstered surface, address it promptly using a material-appropriate method.

4.3 Prevent Scratches and Floor Damage

Use suitable protective pads beneath furniture legs where appropriate, especially on wood, vinyl, tile, or other easily marked flooring. Check the pads periodically for dirt or wear that could scratch the floor.

When moving furniture, remove loose items first and lift the piece with sufficient assistance when its weight or size requires it. Dragging heavy furniture may damage both the furniture and the floor.

5. Care for Storage Furniture and Frequently Used Areas
5.1 Cabinets, Drawers, and Shelves

Avoid overloading shelves, drawers, and storage compartments. Follow the stated capacity and distribute weight evenly to reduce unnecessary strain.

Remove dust from drawer interiors and cabinet corners with a dry cloth or suitable vacuum attachment. If a drawer becomes difficult to open or a door no longer aligns correctly, check the assembly instructions and accessible fittings rather than forcing the component.

5.2 Dining and Work Surfaces

Use placemats, coasters, and suitable protective accessories to reduce contact with hot dishes, moisture, food residue, and sharp objects.

After use, clean the surface with a method appropriate for its material. Avoid cutting directly on furniture surfaces or placing hot cookware on finishes that are not designed to withstand high temperatures.

5.3 Seating and Soft Furnishings

Rotate cushions periodically when the product design permits it. This can help distribute everyday use more evenly and maintain a more consistent appearance.

Avoid standing on chairs, leaning excessively on backrests, or using seating products for purposes beyond their intended design. Follow any assembly, stability, and weight-limit instructions supplied with the product.

6. Safe Cleaning Habits

Before using a cleaning product, read its label and confirm that it is compatible with the furniture material. A product that works well on glass may be unsuitable for a painted finish, natural wood, leather, or upholstery.

For routine care, start with the least aggressive method that is appropriate for the material. Do not mix cleaning chemicals, and keep cleaning products away from children and pets. Allow cleaned surfaces to dry fully before placing objects back on them.

Avoid unverified home remedies, harsh bleaching agents, abrasive powders, and strong solvents unless the product's care instructions specifically recommend them. When the correct method is uncertain, consult the product instructions or contact me before proceeding.

7. Seasonal Care and Long-Term Maintenance

A simple seasonal review can help identify small issues before they become more difficult to address.

Check accessible screws, fittings, and connections on assembled furniture.
Inspect furniture feet and protective pads for wear.
Remove dust from less frequently used areas, including the backs of cabinets and the spaces beneath furniture.
Check stored textiles for moisture, odors, or signs of pests.
Review the condition of exposed surfaces and address spills, scratches, or loose components using suitable care methods.

For furniture that will not be used for an extended period, clean it appropriately and store it in a dry, well-ventilated place. If the item must be disassembled, retain its hardware and follow the original assembly instructions when putting it back together.

8. What to Do if Furniture Is Damaged

Not every mark or change in appearance can be corrected through routine cleaning. If you notice a loose structural component, a cracked glass panel, an unstable frame, or another condition that may affect safe use, stop using the affected item until it has been assessed.

Do not attempt structural repairs, modify load-bearing components, or use replacement parts that are not suitable for the product. If the issue appears to involve a product defect, shipping damage, or an incorrect item, contact me with your order number, a description of the issue, and clear photographs when available.

I will review the information and explain the appropriate next steps in accordance with the applicable Return and Exchange Policy and other relevant order terms. Please retain the product and any packaging that may help clarify the issue until you receive further guidance.

9. Product-Specific Guidance and Customer Support

The recommendations in this guide are general suggestions for maintaining common home furnishing materials. They do not replace the care instructions supplied with an individual product. Cleaning requirements may vary depending on the material, surface treatment, construction, and intended use.

If you have questions about caring for an item purchased from aubmarenodoro, you can contact me using the details below.

Email: team@aubmarenodoro.com

Phone: +1 (510) 684-9273

Mailing Address: 1092 53rd St, Emeryville, CA 94608, United States

Customer Support Hours: Monday–Friday, 9:00 AM–6:00 PM Eastern Time (ET)

I aim to make product care easier to understand by providing practical guidance that supports everyday use. With appropriate cleaning methods, careful handling, and attention to product-specific instructions, you can help maintain a comfortable and well-kept living space over time.